This code can be found in the following places:
* https://wx1.slackology.net/plots/wx.html	<--page
* https://github.com/mcthoren/weather_tools	<--code
* https://wx1.slackology.net/			<--code, data, plots, page

Much of the data for all this is currently collected from a BME680, the datasheet for which can be found here:
* https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME680-DS001.pdf

Notes:

* This is part of an ongoing project to tinker together a weather station from a raspberry pi.

* In theory, if one wanted to run this themselves, they could change the WT_DIR variable, and some of the upload paths, and be off to a good start

* The i2c bus needs to be enabled.  This is probably most easily done with raspi-config.  Make sure your user is in the i2c and gpio groups 

* apt install python3-smbus python3-bme680 #  <-- something like that will help one get off to a good start

* The Air Quality readings are currently raw data from the bme680, the datasheet for which is linked above.